All your potted plant watering peeves solved

Posted on December 09, 2020

Related Products

Meet the Potstream®, a fully adjustable watering device for potted plants and container watering. 100% designed and manufactured in Australia by Antelco Pty Ltd, the Potstream® will end all your pot watering woes.

The Potstream® was designed from the bottom up by firstly considering the top peeves of potted plant watering. Our research identified:

  • Water wastage and soil media washout when watering by hand.
  • There are differing water requirements per plant.
  • There are differing pot sizes.
  • There is differing garden aspects i.e. sun to shade.
  • Patio stains occur from overwatering.
  • Existing irrigation methods are untidy.
  • Existing irrigation methods require the dripper to be placed in the middle of the pot and this is not possible with the plant trunk location in the centre of the pot.

To address these peeves the design of the Potstream® includes the following:

  • A side mounted watering location.
  • An adjustable watering pattern from shut off to distributing water across the pot, via the easily accessible adjustment knob.
  • Light gentle targeted streams to apply water at a low application rate.
  • Tidy micro tube location down the side of the pot.
  • Can be disassembled for flushing and cleaning.

Potstream® is available through your nearest Antelco Distributor. For further information please contact Antelco Pty Ltd at

Copyright 2024 Antelco (en-AU). All rights reserved.