Installation guidelines for Antelco Micro Irrigation Home watering systems

Posted on November 03, 2017


Looking at installing an Antelco Micro Irrigation system then download this Factsheet which gives you the tips and tricks you need to get it right. 

Other than the Antelco fittings and drippers/sprayers you will probably need:

  • 13mm Supply tubing - enough to run around your watering area.
  • 4mm Micro Feeder tubing (as needed) to extend from the supply tubing to the dripper/sprayer.
  • An Antelco 2 n 1 Punch and Cutter to cut your tube neatly and punch holes for your take offs or drippers/sprayers.
  • Pliers for closing ratchet clamps.